For the best experience on the Abcam website please upgrade to a modern browser such as Google Chrome
If you continue without changing your cookie settings, we'll assume you’re happy with this.
??If the answer to your question is not below, please contact scientific support: firstname.lastname@example.org
All products in our range are potentially hazardous and are strictly for laboratory research and development use only. They should not be used for pharmaceutical, veterinary, household, agricultural, food, cosmetic or any other human use. They should only be used by scientifically qualified personnel, trained in laboratory procedures.
Material Safety Datasheets are supplied with all of our products and contain advice regarding the safe handling of your product. However, due to the novel nature of our products, the potential hazards are not always known. It is therefore your responsibility to ensure that all relevant safety precautions are taken at all times.
This is complex and depends on a number of factors including the method of administration (intravenous, intramuscular, or intraperitoneal), bioavailability, half-life, rates of hepatic and renal clearance, binding to proteins, drug interactions and tissue-specific distribution and accumulation. As we do not carry out any biological studies of our products in vivo, we therefore recommend that you review the published literature for dosage guidelines.
The amount of product required depends on many factors including target accessibility, cell permeability, duration of incubation, and type of cells or assay used, it is best to survey the literature to determine the IC50, EC50 or Ki. For an inhibitor, if published Ki or, IC50 values are known, we recommend that you use 5 to 10 times higher than these values to maximally inhibit enzyme or receptor activity. If there are no published values we recommend that you perform dose-response experiments (running appropriate controls) and use Michaelis-Menten kinetics to determine the Ki value.
There is no easy way of predicting if a product will be cell-permeable. Generally charged molecules are not cell-permeable. However, modified phosphorylated compounds, such as mono- and dibutyryl cAMP, are cell-permeable. High molecular weight peptides are generally not cell-permeable under normal conditions.
Our biochemicals are of very high purity, typically >98%. Chemical purity and quality are determined using a comprehensive range of techniques, including HPLC, chiral HPLC, NMR, microanalysis, optical rotation, TLC, and mass spectrometry. Details are provided on the Certificate of Authenticity that accompanies each product.
Products sold in small quantities may not be readily visible, as they can coat the bottom or walls of the vial. It is therefore important that you ensure that solvent comes into contact with all areas of the vial when stabilizing your product. For more information please see some examples of dyed vials.
It is not unusual for different batches of the same product to vary slightly in appearance and color. However, this will not affect purity or quality as described on the batch specific Certificate of Authenticity and will not affect product performance.
The molecular weight and formula published on our website represent the molecular weight and formula of the product as depicted in the chemical structure displayed on our website. However, molecular weights (and formulae) can vary slightly from batch to batch - due to water composition, or due to a change of salt. These changes will be indicated on the Certificate of Authenticity that accompanies your product. The changes should not affect the biological activity of your product, but it is important that you take them into account when making up solutions. You should therefore always use the batch molecular weight as stated on the Certificate of Authenticity or the vial label.
To help you more easily identify a chemical, we provide CAS registry numbers for our products. CAS registry numbers are unique numerical identifiers for chemical substances. The Chemical Abstracts Service (CAS), a division of the American Chemical Society, assigns these identifiers to every chemical that has been described in the literature. Please note, that whilst these are given as accurately as possible on our website, they may not always reflect the level of hydration or salt of the product supplied.
To assist you in your product selection, we provide a brief summary of the biological properties of our products, together with some suggested reading (references) that you may find useful. Please note, that whilst this information is given as accurately as possible on our website, it may not always reflect the latest findings and is not exhaustive. It is intended as a guide only and we therefore recommend that you carry out your own search of the scientific literature for full details of the product's biological activity.
We are often asked for examples of publications which cite Abcam Biochemicals. We try to provide examples of these with our product data wherever possible. If you or your colleagues publish a paper which cites Abcam Biochemicals as the source of one or more of your materials, please send us the details - and we will send you a free gift!
Stabilization instructions can be found on the Certificate of Authenticity accompanying your product, or on the website. Some products may be difficult to solubilize, and you may find that rapid stirring, warming in a water bath, or sonication of the solution may help.
Solubility is temperature dependent. As such, cooling or freezing solutions may lead to precipitation of the product out of solution. It is therefore important to ensure that your product is completely re-dissolved before use.
Amino acids are often difficult to solubilize. A common technique is to use 1 molar equivalent (1eq) of sodium hydroxide (NaOH).
To dissolve compound in 1 equivalent of NaOH(aq.), the following formula can be used to calculate the volume of NaOH (aq) (VolNaOH) of concentration (ConcNaOH ) needed:
e.g for a product with a molecular weight of 197.13g, a mass of 5 mg, and using 100 mM NaOH:
We carry out regular stability tests of our products. However, due to the novel nature of many of our biochemicals, there is little published information on long-term product stability.
You should always follow the recommendations stated on the Product Datasheet. However, we offer the following as a general guide:
Solid: Provided storage is as stated on the product vial and the vial is kept tightly sealed, the product can be stored for up to 6 months.
Solution: Wherever possible, you should prepare and use solutions on the same day. However, if you need to make up stock solutions in advance, we recommend that you store the solution as aliquots in tightly sealed vials at -20°C. Generally, these will be useable for up to one month. Before use, and prior to opening the vial we recommend that you allow your product to equilibrate to room temperature for at least 1 hour.
Solubility is temperature dependent. As such, cooling or freezing solutions may lead to precipitation of the product from solution. It is therefore important to ensure that your product is completely re-dissolved before use.
Storage in the refrigerator or freezer is often recommended for long-term stability of a product. If the product is shipped at ambient temperature it is considered to be stable for the duration of shipping and normal handling. Upon receipt you should then store it in the refrigerator or freezer (as indicated on the label). If you have any specific shipping requirements, please contact customer service.
Unless explicitly stated on the Product Datasheet, the quantity of material supplied in our vials is not weighed to the accuracy required for direct solution preparation.
Abcam Biochemicals peptides are supplied either by net peptide weight, or gross weight and this will be indicated on the Certificate of Authenticity accompanying the product.
While peptides for research use are typically > 95% pure by HPLC, the peptide content of the solid may typically range from 70 to 90% as peptides contain counter ions (e.g. acetate, trifluoroacetate) and residual moisture. The peptide content of each batch is shown on the Certificate of Analysis that accompanies each product.
Net peptide weight: For those peptides supplied by net peptide weight, these are weighed so that the amount of peptide received is exactly that stated on the vial. The actual amount of solid present in the vial will be dependent on the peptide content.
Gross weight: For those peptides supplied by gross weight, it is important that peptide content is taken into consideration. The peptide content is determined by amino acid analysis and is typically 70-90%. The net peptide weight is calculated by multiplying the peptide content by the gross weight. For example, a sample of peptide with gross weight of 5 mg and peptide content of 85% has a net peptide weight of 4.25 mg (5 mg x 0.85).
Dissolve peptides in an appropriate buffer: acidic peptides in basic buffer and basic peptides in acidic buffer. If necessary, sonicate briefly.